Friday, January 30, 2015

Meter Stick Challenge

Using just a meter stick and a 100g weight, we were given the challenge to determine the mass of said meter stick.

The first thing we did was locate the balancing point on the meter stick. We did this by resting the stick on the edge of a table and determining where it balanced on its own, which was about a third of the way up the stick.



To solve, we set up an equation using the formula
 Force x lever arm= Force x lever arm
(Lever arm= distance from axis of rotation)

Note: Convert to Kg.
Use 9.8 for weight

We multiplied the weight (9.8) and lever arm (30) of one side, and set it equal to the weight and lever arm (20) of the other side
Once we got 1.47, we divided by the weight (9.8) to get the weight of the meter stick.



After we found our hypothetical answer, we weighed the meter stick, which ended up being about 146 grams. Since the two numbers are within 10 percent of each other, we know that our process was accurate.

Wednesday, January 21, 2015

Torques and Basketball

Have you ever wondered why basketball players stand with their legs shoulder width apart with their knees bent? Understanding torques will help us answer this question… A torque is a factor that allows an object to rotate. Torques requires both force and a lever arm. A lever arms are the distance from the axis of rotation Torque= force x lever arm When basketball players are playing ball, it is important that they stand stationary so that they won’t fall over. If they stand with their legs shoulder width apart, they are creating a larger base, and in squatting down, a lower center of gravity. These two factors reduce the chances of a torque occurring because there is no lever arm due to the low center of gravity.

Rotational Inertia and Figure Skating



As you can see in the video, the figure skater spins slower while her arms and leg are extended out, and gains speed as she pulls her limbs in closer to her torso. What causes this change?

Rotational inertia allows an object to resist changes in spinning or circular motion. The factor that affects rotational inertia is not the AMOUNT of mass of the object, but rather the DISTRIBUTION of mass and its location on the object.

That being said, when mass is closer to the axis of rotation the object will have a smaller rotational inertia (easier to move). And when mass is further from the axis of rotation, the object will have a larger inertia (harder to move).

In terms of the ice skater…

While her arms are extended out, her mass is further from the axis of rotation, thus yielding a larger inertia. With the larger rotational inertia, she will move slower. As she brings her arms and leg towards her body, she is bringing her mass closer to the axis of rotation, resulting in a smaller rotational inertia. Hence, she spins faster.

Sunday, December 7, 2014

Unit 3 Summary

NEWTONS THIRD LAW: Every action has an equal and opposite reaction
Just a few posts ago, I explained Newton’s Third Law in relation to Harry Potter and the platform nine and three quarters. Thinking back to that, we know that according to the law, every action has an equal and opposite reaction, and that Harry’s cart and the platform hit with the same force. An action reaction pair is a term used to describe the relationship between two interacting objects. In this case, the reaction pair is “cart hits wall, wall hits cart”

Don’t forget that the cart will experience a greater acceleration than the wall. This is because mass and acceleration are inversely proportional (Newton’s Second Law), so the object with a larger mass (wall) will have a smaller acceleration, and the other way around.

If you have ever played a game of tug of war, you may wonder what makes one team win over the other. According to the law, we know that each team is pulling the other with an equal force. However, the team that wins is the team that exerts a greater force on the GROUND. Refer to the diagram below for details…

 
Team red and team blue pull eachother with equal and opposite forces. However, the blue team pushes the ground with more force than the red team, which causes them to pull left with more force, and win.


VECTORS: A visual tool used to add up opposing forces

Say you have a weight hanging from a string, if the weight is on one side of the string, which side has more tension?

 
The longer the tension vectors (red) the more tension that piece of the string has. So there is more tension near the weight, and less on the other side. This means that the longer side of the string with more tension (left) is more suseptable to breakage.

GRAVITATIONAL FORCE: Everything with mass attracts all other objects with mass
Depends on…
àthe mass of the objects  
àdistance between the two objects. The more distance, the less force

Below is a the equation for finding the gravitational force between two objects, and the force of gravity itself.
 
Here is how you would use the equation

Force is directly proportional to mass
Force is inverse squared to distance

Double distanceà force is a ¼ of the original
Triple distanceà force is a 1/9 of the original

Cut d by ½à force is 4x’s greater
Cut d by 1/3à force is 9x’s greater

TIDES: As stated in my previous blog post, tides are created by the differences in force on opposite sides of the earth.  Once side of the earth has a greater force, since it is closest to the moon, and the other side which is farther from the moon experiences less force. These unbalanced forces created a “bulge” or “potato” around the earth (red)


Spring tides are high tides that are higher than usual, and occur when the sun, moon, and earth are all in one line. Similarly, neap tides are lower than typical low tides, which occur when the earth and moon create a right angle.

CONSERVATION OF MOMENTUM
p=mv
∆p=pfinal-pinitial
the total momentum of a system remains constant before and after a collision
àmomentum can be neither created nor destroyed
P Total Before= P Total After

Before                 After
MaVa+MbVb=Ma+b(Vab)

MOMENTUM AND IMPULSE RELATIONSHIP
Impulse: the force exerted on something by a specific time interval
j=∆p
j=fx∆t

Have you ever wondered exactly how seatbelts keep us safe? This can be answered with knowledge of momentum and impulse…
Since change in momentum equals impulse, we know that the car will stop moving  regardless of how it stops.
àthe ∆p and j are constant

with airbag                J=F∆t
without airbag            J= F ∆t


As you can see above, force and change in time are inversely proportional. The seatbelt increases the time of the impulse, and therefore decreases the force. Less force, means it is less likely for you to be injured.

Friday, November 14, 2014

Tides

Having grown up on a peninsula, it is important to know how the tides work. The moon exerts gravitational force on the earth, which creates a difference in force on opposite sides of the earth. Since one side of the earth is closer to the moon (side A), it will have a greater force. And the side furthest away from the moon (side B) is influenced less by gravitational force. These opposing forces create an imaginary “bulge” or “potato” around the earth. Sides A and B with the bulge are at high tide, and C and D at low tide. (Insert diagram here) Spring tides are when high tides are higher than average. These tides occur during a full moon, when the moon sun and earth are all in one straight line. Similarly, neap tides are unusually low tides. These occur during the half moon phase, when the moon and earth are in a line, with the sun across from it. There are four tides every in one full day. Two low tides each lasting 6 hours, and two high tides each lasting 6 hours. Watch this video of the Bay of Fundy, in Nova Scotia Canada, home to the highest tides in the world. Below is this weekend’s tide table for Halls Harbor, Nova Scotia. At 5:18 this morning, the Harbor experienced a high tide of 32.5 feet. At 11:20, the water will leave the harbor, and the low tide will reach a height of 9.8 feet. The current phase of the moon at Halls Harbor is the “Last Quarter”, which means that at this time, the tides will be their average height for this area.

Friday, November 7, 2014

Newton's Third Law meets Platform Nine and Three Quarters

(end 0:08) We are all familiar with the “Platform Nine and Three Quarters” scene from Harry Potter and the Sorcerer’s Stone. Now, lets analyze the physics behind it… When Harry first tries to enter the platform, he hits the brick wall with his cart head on. Which do you think experienced the greater force during the collision; Harry’s cart, or the brick wall? Many people would assume that the brick wall would have more force since it has more mass. However, this is not the case… Newton’s Third Law states that every action has an equal and opposite reaction. That being said, the cart and the platform actually exert equal forces on each other. Which object experiences a greater acceleration? Think back to Newton’s second law… The force is the same, and mass and acceleration are inversely proportional. This means that since the mass of the platform is greater than that of the cart, the acceleration will be smaller. And similarly, since the mass of the cart is smaller, it’s acceleration will be greater. It’s magical, isn’t it?

Sunday, October 26, 2014

Unit 2 Summary

In this unit, we focused solely on how things fall. Appropriate for the season...

FREE FALL-THINGS FALLING STRAIGHT DOWN

Free fall is when objects fall due to the acceleration of gravity. There is no air resistance, and hence, weight has no affect.

Say you throw a penny off a cliff, and you want to know how far it will have fallen after 3 seconds.
You would use the formula d=1/2at2
Plug in 10 (acceleration of gravity) for a, and 3 for t
d=1/2 (10X32)
d=45 meters

If you want to know how fast the penny fell…
Use the formula v=at
V=10X3
V=30m/s


FREE FALL-THROWING THINGS STRAIGHT UP

We already know that objects accelerate at a rate of 9.8 m/s squared. So if you throw a ball upwards, every second it's speed will decrease by 10m/s, which as stated above, is the force of gravity. Similarly, when objects fall, their speed will increase by 10m/s
Use this diagram to help you visualize...

 
To find the balls height at 2 seconds, you would find the total height that it traveled, and subtract that by it’s height at 2 seconds

d=1/2at2
d=1/2 (10X32)
d=45 meters

d=1/2 (10X22)
d=20 m

45m-20m= 15 meters high at 2 seconds


FREE FALL-FALLING AT ANGLES

Lets say an airplane is delivering supplies to an army base. The pilot needs to know how far ahead he should drop the package so that it lands in the right spot.

(Please excused my poor attempt at drawing an airplane. Prime example of why we can't have nice things) 

 

To determine when he should drop the package, use the formula v=d/t as shown below

You can also find how long the package has been falling using d=1/2at2
So the package of supplies needs to be dropped 480 meters before the designated spot.

Also, you might want to find the velocity of the falling object at any given place in it’s path. To do this, you use the formula v=at


THROWING THINGS UP AT AN ANGLE

Say you are throwing a baseball across the field (120 meters), and you know that the ball is in the air for 4 seconds.



In order to find the horizontal velocity, you would use the formula v=d/t
v=d/t
v=120/4
v=30 m/s

The vertical velocity is 20m/s, because the ball is in the air 4 seconds

Now that we know the horizontal (30 m/s) and vertical velocities (20m/s), we can use this information to find the true velocity…

The path of the two velocities create a triangle, and use can use the Pythagorean Theorem to find the balls true velocity

 


NEWTON’S SECOND LAW

a=f/m

Mass is Inversely proportional to Acceleration
Force is Directly proportional to Acceleration

Use this helpful pneumonic device to remember…
MIA FDA

Another helpful formula to know is w=mg
Say you have an object with a mass of 30 newtons…what is it’s weight?
w=30X10
w=300 kg


During the lab we did in class we used a cart, a hanger, some weights, and a track, and experimented with Newton's Second Law. 

Trial A
Mass increased, force stayed constant
àacceleration decreased

y=   m    x
a=  1/m   f

Trial B
Force increased, mass stayed constant (weight transferred)
àacceleration increased



THINGS FALLING WITH AIR RESISTANCE- SKYDIVING



Since net force decreases as you fall, your F weight and F Air will eventually equal each other, and your F Net will become zero. This is called terminal velocity, where you will begin to move at a constant velocity.

Parachutes
Once you are through skydiving, you will want to slow down to ensure that you don't hit the ground with extreme speed, for obvious reasons. You can use a parachute to do this. 
àonce you open the parachute, your air resistance will increase for a brief moment, then immediately begin decreasing.
àvelocity decreases because you are accelerating in the opposite direction
àyou will enter a second terminal velocity, which has a slower velocity due to the higher surface area

Don't try this at home kids.

THINGS FALLING WITH AIR RESISTANCE

Have you ever crumpled up a piece of paper, and tossed it into your trashcan? I usually miss, but that’s not the point. Anyways, moving on…

If you drop a balled up piece of paper (A) and a flat sheet of paper (B), you will notice that the compressed paper hits the ground first.
Paper A has a faster velocity, because it has to accelerate longer to reach terminal velocity
Paper B has a slower velocity because with it’s extra surface area, it has initial F Air and does not have to accelerate for as long.


Similarly, if you drop a golf ball and a ping pong ball from a high enough point, the golf ball hits the ground first. This is because it has a greater F weight, and therefore a greater F Air in order to push it towards the ground. The ping pong ball has less F Weight and F Air, thus, will take longer to fall.